- Products
- Supermicro SYS-7039A-i Mid Tower Barebone Dual Processor
• Whisper Quiet Workstation
Barebone Mid-Tower Superserver, Dual Intel Xeon Scalable Processors Gen. 2, Intel C621 chipset, Up to 4TB DDR4 ECC 2933MHz memory, 4 Hot-swap 3.5in drive bays, Dual LAN with GbE from C621, Redundant 1200W Power Supply (CSE-732D3-1200B + MBD-X11DAi-N)
- Features
- Specification
- Parts-list
- Optional Parts-list
- Warranty
- Technical Support
- Contact Us
1. Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake) ‡
2. 16 DIMMs; up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
3. 4 PCI-E 3.0 x16, 2 PCI-E 3.0 x8 slots, M.2 Interface: PCI-E 3.0 x4 M.2 Form Factor: 2260, 2280, 22110 M.2 Key: M-Key, 2 PCI-E 3.0 NVMe x4 Internal Port(s)
4. 2x 1GbE LAN ports
5. 7.1 HD Audio
6. 4 Internal fixed 3.5" drive bays, 2 5.25" peripheral drive bays
7. 1 M.2 slot, 2 NVMe support with optional cables
8. 1200W High-efficiency Power Supply Platinum Level Certified
Extra Specifications for Supermicro SYS-7039A-i Mid Tower Barebone Dual Processor
| Motherboard | ||
| Motherboard | Super X11DAi-N | |
| Processor/Cache | ||
| CPU | Dual Socket P (LGA 3647) | |
| 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s | ||
| Support CPU TDP 70-205W * | ||
| Cores | Up to 28 Cores | |
| Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) | |
| * 200W/205W CPUs are supported under certain configurations. Special Low Tcase CPU SKUs are not supported. Please contact Supermicro Technical Support for additional information and specialized system optimization. | ||
| Must add Heatsink SNK-P0070APS4 when purchasing complete system from Supermicro. | ||
| System Memory | ||
| Memory Capacity | 16 DIMM slots | |
| Up to 4TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM | ||
| Memory Type | 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
| DIMM Sizes | 3DS LRDIMM: 128GB | |
| RDIMM: 64GB | ||
| LRDIMM: 64GB | ||
| Memory Voltage | 1.2V | |
| Error Detection | Corrects single-bit errors | |
| Detects double-bit errors (using ECC memory) | ||
| Note | DIMM capacities larger than 32GB are supported under certain configurations. Please contact Supermicro Technical Support for additional information and specialized system optimization. | |
| On-Board Devices | ||
| Chipset | Intel® C621 chipset | |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 | |
| Network Controllers | Dual LAN with GbE from C621 | |
| IPMI | ASPEED AST2500 | |
| Audio | RealTek ALC888 7.1 High Definition Audio with S/PDIF header | |
| Input / Output | ||
| SATA | 10 SATA3 (6Gbps) ports | |
| NVMe | 2 NVMe support with optional cables | |
| LAN | 2 RJ45 Gigabit Ethernet LAN ports | |
| USB | 2 USB 3.1 ports (rear) | |
| 6 USB 3.0 ports (4 rear, 2 front) | ||
| Audio | 7.1 HD Audio with optical S/PDIF | |
| Video | 1 VGA port | |
| Serial Port / Header | 1 COM port (header) | |
| DOM | 2 SuperDOM (Disk on Module) ports | |
| TPM | 1 TPM 2.0 Header | |
| System BIOS | ||
| BIOS Type | UEFI 128M | |
| Management | ||
| Software | Watchdog | |
| SuperDoctor® 5 | ||
| Intel® Node Manager | ||
| IPMI 2.0 | ||
| SSM , SPM , SUM | ||
| PC Health Monitoring | ||
| CPU | 4+1 Phase-switching voltage regulator | |
| Monitors for CPU Cores, Chipset Voltages, Memory. | ||
| FAN | Status monitor for speed control | |
| Pulse Width Modulated (PWM) fan connectors | ||
| Fans with tachometer monitoring | ||
| Temperature | Monitoring for CPU and chassis environment | |
| Thermal Control for fan connectors | ||
| Chassis | ||
| Form Factor | Mid-Tower | |
| Model | CSE-732D3-1K26B | |
| Dimensions and Weight | ||
| Height | 16.7" (424mm) | |
| Width | 7.6" (193mm) | |
| Depth | 20.68" (525.3mm) | |
| Gross Weight | 40 lbs (18.1 kg) | |
| Available Colors | Black | |
| Front Panel | ||
| Buttons | Power On/Off button | |
| LEDs | Power LED | |
| System Information LED | ||
| Hard drive activity LED | ||
| Network activity LED | ||
| Ports | 2 front USB 3.0 Ports | |
| 2 front HD/AC97 Audio Ports | ||
| Expansion Slots | ||
| PCI-Express | 4 PCI-E 3.0 x16 slots | |
| 2 PCI-E 3.0 x8 slots | ||
| M.2 | Key: M-Key | |
| Form Factor: 2260, 2280, 22110 | ||
| M.2 Interface: PCI-E 3.0 x4 | ||
| Drive Bays | ||
| Internal | Enterprise SATA HDD only recommended | |
| 4 Fixed 3.5" drive bays (90° rotatable drive cage) | ||
| Peripheral Bay | 2x 5.25" standard drive bays | |
| 4x 2.5" fixed drive bays (optional) | ||
| System Cooling | ||
| Fans | 1x 12cm rear exhaust fan | |
| 1x 12cm front cooling fan | ||
| Optimized cooling technology for Whisper-Quiet Operation | ||
| Power Supply | ||
| Power Supply | 1200W PS2 Multi-output Power Supply | |
| Power Efficiency | 94% | |
| Total Output Power and Input | 1000W with Input 100 - 120Vac | |
| 1200W with Input 120 - 240Vac | ||
| AC Input Frequency | 50-60 Hz | |
| Dimensions (L x W x H) | 185 x 150 x 86 mm | |
| Output Type | 24pin ATX | |
| -12V | Max: 0.3A / Min: 0A | |
| +12V | Max: 83A (100Vac - 120Vac) | |
| Max: 99A (120Vac - 240Vac) | ||
| +5V | Max: 20A / Min: 0A | |
| +3.3V | Max: 20A / Min: 0A | |
| +5Vsb | Max: 3A / Min: 0A | |
| Certification | Platinum Certified | |
| Operating Environment / Compliance | ||
| RoHS | RoHS Compliant | |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) | |
| Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) | ||
| Operating Relative Humidity: 8% to 90% (non-condensing) | ||
| Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
| Product SKUs | ||
| Product SKUs | SYS-7039A-i (Black) | |
| Name | Part Number | Qty. | Description | |
|---|---|---|---|---|
| Motherboard / Chassis | MBD-X11DAi-N | 1 | Super X11DAi-N Motherboard | |
| Motherboard / Chassis | CSE-732D3-1K26B | 1 | 3U Mid-Tower Chassis | |
| Cable 1 | CBL-0071L | 1 | CBL,FRONT CNTL,16 TO 16 PIN,RA,RND TUBE,75CM,28AWG | |
| Cable 2 | CBL-0082L | 2 | Y split , big 4 pin to two RA SATA power extension 15cm, 18AWG | |
| Cable 3 | CBL-0084L | 1 | CBL,FRONT CNTL,SPLIT,16 PIN,W/CONVERTER HEAD,15CM,26AWG | |
| Cable 4 | CBL-0160L | 1 | NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) | |
| Cable 5 | CBL-0453L | 1 | USB 3.0,INT,19 PIN/F TO 19PIN/F,60CM,CONNECT TO CBL-0454L | |
| Cable 6 | CBL-0455L | 1 | CBL,AUDIO,HD/AC97,60cm | |
| Cable 7 | CBL-SAST-0624 | 4 | SATA,INT,ROUND,ST-ST,70CM,30AWG | |
| FAN 1 | FAN-0124L4 | 1 | 12 CM x12 CM fan | |
| FAN 2 | FAN-0124L4 | 1 | 12 CM x12 CM fan | |
| Drive Tray(s) | MCP-220-73101-0B | 4 | SC731 Tool-less Internal 3.5inch HDD Tray | |
| Parts | MCP-260-00115-0N | 1 | Standard I/O Shield for X11DAi with EMI Gasket | |
| Manual | MNL-1996-QRG | 1 | 7039A-I Quick Reference Guide | |
| Power Supply | PWS-1K26P-PQ | 1 | 1000W/1200W PS2 Multi output power supply with modular cable |
| Name | Part Number | Price | Add to Cart | Qty. | Description | |
|---|---|---|---|---|---|---|
| NVMe support kit | MCP-220-73201-0N | $70.50 | 0 | SC732 2.5" HDD Cage (4x Internal 2.5" HDD) | ||
| NVMe support kit | CBL-SAST-0956 | $31.00 | 0 | Oculink to PCIe SFF-8639 w/ Power, 55CM - ADD QTY 1 per drive | ||
| HDD Cage for 2.5" drives | MCP-220-73201-0N | $70.50 | 0 | SC732 2.5" HDD Cage (4x Internal 2.5" HDD) | ||
| HDD Cage for 2.5" drives | 4x CBL-SAST-0624 | 0 | SATA,INT,ROUND,ST-ST,70CM,30AWG | |||
| Heat Sink | SNK-P0070APS4 | $78.50 | 0 | 4U Active CPU Heat Sink - Add QTY 1 per CPU | ||
| Fan | FAN-0077L4-1 | 0 | 120x120x38mm, 4K RPM, Optional Rear Exhaust Fan for SC732 | |||
| DVD-RW | DVM-LITE-DVDRW24-HBT1 | $44.50 | 0 | BLACK LITE-ON 5.25" HH 24X DVD-RW SATA DRIVE PBF | ||
| DVD-RW | 1x CBL-SAST-0624 | 0 | SATA,INT,ROUND,ST-ST,70CM,30AWG | |||
| DVD-RW | 1x CBL-0082L | 0 | Y split, big 4 pin to two RA SATA power extension 15cm, 18AWG |
| Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
| Coverage: | Replacement or repair |
| Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
| E-mail: | returnservices@wiredzone.com |
| If you need Technical Support for this item please contact: | |
| Provider: | Supermicro |
| Type of Support: | FULL |
| Phone No.: | 408-503-8000 |
| URL: | Click here for Manufacturer Website |
